Miscellaneous Bases, Housings, Bezels & Armor - Truck-Trailer-Lights & Lenses
NOTE: Click on the thumbnail picture for a full view.
To Buy something,
email me 'lights@taillightking.com'
or Call me 936-524-6116!!
Page last updated:
03/10/2022 12:13 PM
Part# | Year | Type | Description | Picture | Price |
No Name | Bezel | Bezel, 2 1/4" dia. x 1 5/8" Lens opening x 5/8" High, screw hole on bottom (have 1) | $10 | ||
KD 510 | Marker | Base Only, Metal, Double Sided, Takes 2 7/16 to 2 1/2" diameter lenses and snap rings, New, (Have 0) | $20Sold | ||
84207GG | All | All | Snap ring for 2 1/2 Inch mount, Holds lens in place. Stainless Steel, (In Stock) | $4 ea. | |
Grote 9140 | Mount | Rubber Mount for 2 1/2" ID for lens, Fits in 3" hole, (Have 5) | $4 ea. | ||
Center Bolb | Housing | Housing for Bee Hive lens, Single Hollow bolt mount straight out of back. Good condition (Have 1) | $10 | ||
Safe Ray by Swartz Electric | ? | Housing, Chrome Metal, 2 5/8" dia. at face x 2 1/8" deep, comes with bracket and switch, Lens is missing, Used - Quite good condition, (Have 1) | $30 | ||
Grote 201, SR1535 |
Marker | Base Only, Metal, 2 3/4" diameter Maximum, Holds 2 7/16 - 2 1/2" lens, (Have 2) | $10 ea. | ||
Yankee 975 | ? | Bezel, Metal, 2 3/4" Diameter with 2 3/16" lens hole, 2-Slot mount on the side for mounting, Looks super (Have 3) | $10 ea. | ||
Dietz 34-1 | Marker | Base Only, Metal & Plastic, 2 3/4" diameter Maximum, Holds 2 7/16 - 2 1/2" lens, (Have 1) | $10 | ||
PM 150, TruckLite #15 Grote 4641 |
Marker | Base, rectangular, Black or Chrome Plastic, 2 7/8" Long x 1 1/2" wide x 1/2" high, Assembly snaps into this base (have 5) | $4 ea. | ||
Dietz 107 | Taillight | Assembly with single bolt mount, , 3 3/16" diameter x 2 3/4" deep, for DZ77-116 snap-on lens (Have 0) | $25Sold | ||
No Name | ? | Base & Bezel, 3 1/4" diameter x almost flat, for 2 1/2" lens with flang (Have 1) | $25 | ||
Hy Power 52 | Marker | Base Only, Metal, 3 3/8" x 2 5/8", Holds 2 7/16 - 2 1/2" lens, (Have 1 with sideways socket) | $10 ea. | ||
Grote 266 | 67-? | Marker | Base Only, Plaltic, 3 1/2" x 1 1/8", Holds Grote 9015 lens, (Have 1 with sideways socket) | $10 | |
No Name | Marker | Base Only, Cast Metal, 3 3/4" x 2 5/8", Holds 2 7/16 - 2 1/2" lens, (Have 1) | $10 | ||
Grote 9141 | Mount | Rubber Mount for 2 3/4" ID for lens, Fits in 3 1/4" hole, (Have 6) | $4 ea. | ||
Guide MB5A | GM Trucks | Clearance | Lens Bezel, Fits Guide M-B5 Clearance Assembly, 3 1/2" diameter x 3/4" tall with 3" hole spacing for 2 screw mount, Used - Fair to good condition (See Truck Clearance Lights Page) | see other page | |
Guide MB5A &
Aftermarket Replacements |
GM Trucks | Clearance | Lens Bezel, Fits Guide M-B5 Clearance Assembly, 3 1/2" diameter x 3/4" tall with 3" hole spacing for 2 screw mount, Used - Fair to good condition (See Truck Clearance Lights Page) | see other page | |
Pilot 7935 -
7945 |
GM Trucks | Clearance | Lens Bezel, Aluminum, Fits Pilot Clearance Assembly, 3 1/2" diameter x 7/16" tall with 2 3/4" hole spacing for 2 screw mount, Used - Fair to good condition (See Truck Clearance Lights Page) | see other page | |
GG 92499 | GM Trucks | Base Assembly, Fits Guide M-B5 Clearance Assembly, 3 1/4" diameter, Dual element bulb socket for bulbs like 1157, New (In Stock) | $10 ea. | ||
GG 92506 | GM Trucks | Gasket and 0-Ring Set, Fits Guide M-B5 Clearance Assembly, New (In Stock) | $10 set | ||
ALD CB22983 | Taillight? | Bezel, Metal, With a Visor on top, 3 1/2" Diameter with 2 1/2" lens hole, 1-hole mount on the bottom and a tab for mounting on the top, Chrome Metal, Looks super (Have 1) | $30 | ||
VP636 | Chrome | Trim Ring, Chrome, 2 1/4" lens hole, 3 1/16" screw hole centers, (have 1) | $20 | ||
Autolamp SL49 | Chrome | Trim Ring, Chrome, 2 1/4" lens hole, 2 3/8" screw hole centers, (have 1) | $10 | ||
Autolamp UN-67 | Chrome | Trim Ring, Chrome, 2 3/4" diameter x 2 1/4" lens hole, 2 3/8" screw hole centers, Used - Good condition (have 2 Chrome & 1 Black) | $10 ea. | ||
Deitz 49-4 | Taillight | Assembly with 2 single element bulb holders, Metal base, 3 5/8" diameter for 3 1/4" push on lens, New (Have 1) | $20 | ||
3 5/8" | Taillight | Bezel, Fits Stratolite 28 & Do Ray Tiger-Ey P-1254 lenses, 3 5/8" diameter x 2 screw holes 3" center to center, Used - Rusty Chrome or Black (Have 1 Rusty Chrome) | $10 | ||
PM 426 | Taillight | Assembly with dual element bulb holder, Metal base with glass license lens, 3 9/16" diameter x 2 3/8" deep, Takes PM 420-15 Lens, (Have 1) | $12 | ||
Universal Nite-Owl | Taillight | Assembly with 2 single element bulb holders, Metal base missing glass license lens, 3 3/4" diameter x 2 3/4" deep, 1 mounting stud broken off (Have 1) | $20 | ||
Griffin 114 | Housing | Cast 'Aluminum with single element bulb holder, 3 3/4" diameter x 5/8" deep, 3-holes for mounting (Have 1) | $20 | ||
Chrome 2-Groove | Bezel | chrome steel with 2 gooves in face, 3 3/4" diameter x 5/8" deep, pushes in and turns for mounting (Have 1) | $20 | ||
3 13/16" | ? | Taillight | Bezel for Red Glass Bubble lens # 1963, 3 13/16" outside diameter x 3" lens diameter, 2-screw holes 3 1/8" center to center, Nice looking bezel with rolled edge, (Have 1) | $20 | |
3 13/16" | ? | Tail Light | Bezel, painted black, 3 13/16" outside diameter x 3 1/8" lens diameter, 2-screw holes 3 1/2" center to center, Nice looking bezel (Have 1) | $20 | |
Do Ray-D | Taillight | Assembly with dual element bulb holder, Metal base with Plastic license lens, 3 13/16" diameter x 2 5/8" deep, Takes PM 420-15 Lens, New (Have 1) | $25 | ||
Dietz Protector | Taillight | Assembly with 2 single element bulb holders, Metal base missing glass license lens, 3 7/8" diameter x 2 1/2" deep, (Have 1) | $20 | ||
Snap-In Cover | Cover | 3 7/8" diameter x 5/8" deep Chrome Plastic snap-on cover, 3-Tabs to hold, Used - Some scratches on chrome (Have 1) | $10 | ||
3 7/8" | ? | Bezel | Bezel, painted black, 3 7/8" outside diameter x 3 1/8" lens opening, 2-screw holes 3 1/8" center to center, Nice looking bezel (Have 1) | $20 | |
Aluminum Hooded | Bezel | Bezel, Aluminum heavy duty with a small hood, 3 7/8" diameter x 5/8" lower bezel deep x 1 1/8" Hood Depth x 2 5/8" Inside Hole, 2-screw mount 3 1/4" apart, Used - Some are rough but can be cleaned up (Have 5) | $20 ea. | ||
3 15/16" | ? | Tail Light | Bezel, painted black, 3 15/16" outside diameter x 3 7/16" lens diameter, 2-screw holes 3" center to center droped down from center of lens, Nice looking bezel (Have 1) | $20 | |
Reflect-O-Lite 400 | Base | Base Assembly, 3 15/16" x 1 15/16", (Have 0) | $10 sold | ||
30005-1 | Marker | Base Assembly, Chrome or white Plastic, For Rounded Rectangle Tiger-Eye Lenses, 3 15/16" long x 1 15/16" wide, two 194 style bulbs, New (In Stock) | $10 ea. | ||
Signal Stat #17 | Taillight | Housing, metal bullet shaped housing, 4" dia. x 2 1/2" deep, Single post mount, New - good condition - May need parts (have 2) |
|
$10 ea. | |
Truck-Lite 10727 | Marker | Base, Plastic base for bee Hive lens, 4" lone x 2 1/4" wide with 2 screw mount, Mounts on a curve, Bee Hive Lens snaps on, New - good condition - needs bulb socket (have 4) |
|
$10 ea. | |
Peaked Bezel | Taillight? | Bezel, Metal, With a Peak on top, Fits KD200 housing, 4" Diameter with 2-hole mount 3" center to center dropped down 3/4" x 9/16" deep from face, Black Metal, New (Have 0) | $20Sold | ||
Round Bezel | Taillight? | Bezel, painted Metal, 4" Diameter x 3" ID of hole with 2-hole mount 3 1/2" center to center x 5/8" deep from face, Black Metal, New (Have 1) | $20 | ||
32109 | Fits Cyclostat Lenses | Chrome Trim ring and visor, Fits 4" diameter Cyclostat & Cyclostat II Lenses and assemblies. New, Visor Right Side Up on top, (In Stock) | $10 ea. | ||
32110 | Fits Cyclostat Lenses | Chrome Trim ring and visor, Fits 4" diameter Cyclostat & Cyclostat II Lenses and assemblies. New, Upside Down visor on bottom for hanging light, (In Stock) | $10 ea. | ||
Signal Stat 1220/1211 | Marker | Base Assembly, PLastic, For Tiger-Eye Lenses, 4" x 2", two bulbs, New (Have 0) | $10Sold | ||
PM 13901 | Marker | Base Assembly, Metal, For Tiger-Eye Lenses, 4" x 2", two bulbs, New (Have 0) | $10Sold | ||
Dietz 59 | Marker | Base Assembly, Metal, For Rounded Rectangle Lenses, 4" x 2", two bulbs, New (Have 0) | $10Sold | ||
GG 90384 | All | Snap Ring | Snap ring for 4 Inch mount, Holds lens in place. Stainless Steel, (In Stock) | $10 ea. | |
Saf-T-Ray VP2367 | Marker | Base Housing Only, Heavy Metal, Uses 2 1/2" push-In lens, 4 1/16" dia x 2" max depth, 4-Screw mounting on 3 5/8" Centers (Have 2) | $10 ea. | ||
Arrow 35 | Marker | Base Housing Only, Metal, Uses 2 7/16" dia lens lens, 4 1/4" dia, 3-Screw mounting (Have 0) | $10 sold | ||
Rectangular Bezel | Taillight? | Bezel, Stainless, 4 3/16" x 2 3/16" total size," 3" x 1 7/8" opening with 2-hole mount 3 5/8" center to center, (Have 1) | $20 | ||
Grote 5088 | 72-? | Tail Light | Housing with license lens, painted steel, Dual filiment like 1157 socket, 4 1/4" dia x 2 3/8" deep, Takes 3-screw lens at 3 12" screw circle, Used - Good (Have 1) | $20 | |
Tail Light Bezel w/divider | Old | Tail light | Bezel with arc divider, Chrome or nickle plated, 4 3/8" dia, Has metal "STOP" in back of upper lens, Used - Lenses cracked - Bezel has a couple of dents. Hard to find. (Have 1) | ||
Flared Light | ? | Flared Light Housing, Metal, 4 3/8" long x 3 1/2" wide x 3" tall, 2 1/4" lens hole, (Have 1) | $25 | ||
KD527 | ? | Flared Light Housing, Metal, 4 1/2" Dia. x 7/8" tall, 2 15/16" lens hole, (Have 1) | $10 | ||
Autolamp 661 | Marker | Base Assembly Only, 4 5/8" long x 3 15/16" wide metal, Holds 3 1/4" lens with snap ring (Have 0) | $10Sold | ||
No Markings | ? | Rectangular base assembly, 4 11/16" x 1 7/8", Single element bulb socket, Metal, (Have 1) | $10 | ||
No Label | Interior? | Metal Base Assembly, 4 3/4" x 2 3/4", Single element bulb socket, flush mount (Have 1) | $10 | ||
No Markings | ? | Rectangular base assembly, 4 3/4" x 1 13/16", 194 type bulb socket, Metal, (Have 2) | $10 ea. | ||
Dietz 94 | Marker | Armor Only, Plastic, 4 13/16" long x 2 3/16" wide x 1 3/8" high, (Have 0) | $4Sold | ||
Reflect-O-Lite 210 | Marker | Base Assembly Only, 4 7/8" long x 2 7/8" wide plastic (Have 0) | $10 sold | ||
Hall 521306 | Bezel | Bezel, Chrome with fluting, 5" diameter, 2-screw mount 3 1/2" center to center, Used - Pretty nice chrome (Have 1) | $25 | ||
PM123 | Marker | Armor Only, Cast Aluminum, 5" long x 2 1/8" wide x 1 3/8" high, (Have 1) | $10 | ||
Do Ray 0320 | Marker | Base Assembly, 5-1/8" Long x 3-1/2" wide x 7/8" high, 2-element bulb (1157), New with rubber base seal (have 1) | $20 | ||
KD 541, Yankee 78 | Marker | Marker Light Armor Only, Cast Aluminum, 5 1/4" long x 2 3/16" wide x 1 3/8" high, (Have 2) | $10 ea. | ||
PM 555L | Taillight | Assembly with dual element bulb holder, Plastic base with plastic license lens, 5 3/8" diameter x 3" deep, With side marker built in, Takes Stratolite 69 lens, (Have 1) | $20 | ||
T24 | Housing | Assembly with dual element bulb holder, 5 5/8" diameter x 1/2" above mount x 2 1/2" below, Cast Aluminum housing, Takes 3 3/4" lens, Used - fair condition (Have 1) | $20 | ||
Arrow | Marker | Marker Light Armor Only, Cast Aluminum, 5 7/8" long x 2 1/8" wide max x 1 7/16" high, (Have 3) | $10 ea. | ||
Cat Eye | Base | Oval Plastic Base, takes lens that fits with raised square on one side and a small screw on the other, 5 15/16" long x 1 1/4" wide x 1 1/4" high, 2-mount bolts 3 1/8" c to c, Used - Good Condition (Have 1) | $10 | ||
Stainless Bezel | ? | Light? | Stainless Bezel, 6 1/2" outside x 5" inside with tapered inner edge, 3-hole mount, Used- Good (Have 1) | $10 | |
10541B UP | Bezel | Bezel for 6" Oval lights that are rubber mounted, 7 3/4" x 3 1/2", Chromed plastic that snaps in place, new (In Stock) | $10 ea. | ||
9552-6 GB | Bezel | Bezel for 6" Oval lights that are rubber mounted, 7 7/8" x 3 5/8", Chromed plastic that is held on with 4 screws, new (In Stock) | $10 ea. | ||
Reflect-O-Lite 110-150 | Marker | Base Assembly Only, 6 3/4" Diameter Metal, Looks new, (Have 0) | $25Sold | ||
Weldon 1020-1 | 71-? | Marker | Base, Metal for Weldon 1020 lens and 5-1/2" sealed beam light (4636 Bulb is what comes in them) Used- Good (Have 1) | $10 | |
Taillight Mounts | |||||
No Name 6 1/4" | Old | Taillight | Mount with License holder mount, 6 1/4" from tip of bas to light mount flang, Light mount is oval 2 15/16" x 2", Base is teardrop 3 5/8" x 2", Used - Pretty Nice. | $125 | |
635018 | 35-? | Taillight | Mount, Fits Plymouth Cars, 7 7/16" total length, 5 1/8" x 2 3/8" teardrop mount to body - 1 15/16 Diameter mount to taillight - 2 screw mount 1 3/8" center to center, Used - Good with a small crack on the side (Have 0) | $50Sold | |
619731 L | 30's | Taillight | Mount, 6 1/2" total length, 4 3/4" x 2 5/16" teardrop mount to body - 1 15/16 Diameter mount to taillight - 2 screw mount 1 3/8" center to center, Used - Chrome has lots of little pits (Have 1) | $125 | |
No Number 7 1/16" | 30's | Taillight | Mount, 7 1/16" total length, 4 5/8" x 2 3/16" teardrop mount to body - 1 15/16 Diameter mount to taillight - 2 screw mount 1 3/8" center to center, Used - very nice condition (Have 1) | $125 | |
619779 | 30's | Taillight | Mount, 5 13/16" total length, 4 1/4" x 2 3/16" teardrop mount to body - 1 15/16 Diameter mount to taillight - 2 screw mount 1 3/8" center to center, Used - Good with front of the mount to body broken off (Have 1) | $50 | |
Michigan 15347 | 30"s | Taillight | Mount with red glass reflector, Looks Left Hand, Teardrop Base 4 1/2" Long x 2 1/4" wide max, Teardrop Light Mount 4 15/16" long x 1 5/8" wide Max. Used - Excellent condition (Have 1) | $125 |
For clearance light bases and covers see Truck Clearance Light Page.